h-frame-scaffolding-ethiopia-price

Complete red H-frame scaffolding set with four adjustable jacks supplied by Conmart Ethiopia — Conmart H-frame scaffolding full set: 2 H-frames, 2 X-connectors and 4 adjustable jacks.

ለSlab formwork ሥራ ጠንካራ፣ በቀላሉ የሚገጣጠምና ደጋግሞ ጥቅም ላይ የሚውል የድጋፍ ሲስተም ይፈልጋሉ? Conmart በኢትዮጵያ ውስጥ ለግንባታ ፕሮጀክቶች የሚሆን H-frame scaffolding full set ያቀርባል።

The Conmart H-frame scaffolding set provides an organized support arrangement for concrete slab formwork. Each full set contains the frames, cross-connectors and adjustable jacks required for one standard setup.

Current full-set prices
With 1 m jacks: 18,780 birr
With 60 cm jacks: 16,800 birr

Prices and stock are subject to confirmation at the time of order.

What is included in one H-frame scaffolding full set?

አንድ ሙሉ H-frame scaffolding set የሚከተሉትን ይይዛል፦

2 H-frames
2 X-connectors / cross braces
4 adjustable screw jacks
Approximate working coverage: 7 m²

The X-connectors brace the two frames and help maintain the assembled system’s shape. Four threaded jacks allow controlled height adjustment so the formwork support level can be aligned correctly.

H-frame scaffolding dimensions

Specification	Measurement
Overall height	2.50 m
Set length	1.60 m
Set width	1.10 m
Approximate coverage	7 m²

These dimensions help contractors estimate how many full sets may be required. Final quantity and spacing must be confirmed by the project engineer according to slab thickness, loads, layout and site conditions.

Available jack options and prices

H-frame full set with 1 m adjustable jacks

Price: 18,780 birr per full set. The 1 m option provides a wider adjustment range where the approved support level requires additional vertical flexibility.

H-frame full set with 60 cm adjustable jacks

Price: 16,800 birr per full set. The 60 cm option is suitable where a shorter adjustment range meets the approved formwork layout.

Confirm the required jack length with the site engineer. Select the jack from the actual floor-to-formwork height and permitted adjustment range, not price alone.

Where is H-frame scaffolding used?

Concrete slab formwork support
Beam formwork support where approved by the engineer
Temporary access arrangements with the correct platform and safety components
Modular work towers with guardrails, toe boards, access ladders and stabilizers

The system must be assembled and used according to an approved temporary-works design. Components used for slab support should not automatically be treated as a safe access tower without the required access and fall-protection equipment.

Benefits of a complete H-frame set

Faster assembly

Modular frames and X-connectors help crews organize the support layout faster than loose, improvised components.

Adjustable working height

Threaded screw jacks make it possible to fine-tune the support level before placing formwork members.

Reusable steel components

When handled, stored and inspected correctly, frames, connectors and jacks can be reused across multiple construction stages and projects.

Easier quantity planning

With approximately 7 m² coverage per standard set, contractors can prepare a preliminary quantity estimate before the engineer confirms the final layout.

How to estimate the preliminary number of sets

Number of sets = Total slab area ÷ 7 m²

For example, a 140 m² slab gives a preliminary estimate of 140 ÷ 7 = 20 sets.

This is only an early purchasing estimate. It does not replace an engineered formwork design. Beam locations, slab edges, openings, load concentrations and spacing requirements can increase the actual quantity.

What to inspect before every use

Check frames for bends, cracks, excessive corrosion and damaged welds.
Confirm X-connectors are straight and locking points work correctly.
Inspect jack threads, adjustment nuts and welded plates.
Remove damaged or incompatible components from service.
Confirm the supporting ground or slab is stable and adequately prepared.
Use approved sole plates, bracing and connection methods where required.

Never exceed the manufacturer’s or engineer’s approved load and adjustment limits.

Why order H-frame scaffolding from Conmart?

Conmart helps homeowners, contractors, construction companies and material resellers find construction products with clear specifications and direct ordering support.

When requesting a quotation, provide your total slab area, floor-to-formwork height, preferred jack option, required quantity or project drawings, and delivery location.

Frequently asked questions

How many square metres does one H-frame set cover?

One standard Conmart H-frame set covers approximately 7 m². Final spacing and quantity must be confirmed by the project engineer.

What is included in one full set?

One full set includes 2 H-frames, 2 X-connectors and 4 adjustable screw jacks.

What is the price of H-frame scaffolding in Ethiopia?

The full set with 1 m jacks is 18,780 birr. The full set with 60 cm jacks is 16,800 birr. Prices and availability must be reconfirmed before ordering.